spec no: dsac7646 rev no: v.6 date: jun/03/2016 page: 1 of 4 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1202001801 phototransistor part number: AM4457P3C features z mechanically and spectrally matc hed to infrared emitting led lamp. z rohs compliant. description made with npn silicon phototransistor chips. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsac7646 rev no: v.6 date: jun/03/2016 page: 2 of 4 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1202001801 electrical / optical characteristics at ta=25c absolute maximum ratings at ta=25c symbol parameter min. typ. max. units test conditions v br ceo collector-to-emitter breakdown voltage 30 v i c =100ua ee=0mw/c O v br eco emitter-to-collector breakdown voltage 5 v i e =100ua ee=0mw/c O v ce (sat) collector-to-emitter saturation voltage 0.8 v i c =2ma ee=20mw/c O i ceo collector dark current 100 na v ce =10v ee=0mw/c O t r rise time (10 to 90 ) 15 us v ce = 5v i c =1ma r l =1000 ? t f fall time (90 to 10 ) 15 us i (on) on state collector current 0.35 0.8 ma v ce = 5v ee=1mw/c O =940nm parameter max.ratings collector-to-emitter voltage 30v emitter-to-collector voltage 5v power dissipation at (or below) 25c free air temperature 100mw operating temperature -40c to +85c storage temperature -40c to +85c lead soldering temperature (>5mm for 5sec) 260c note: 1. relative humidity levels maintained between 40% and 60% in pr oduction area are recommended to avoid the build-up of static electricity ? ref jedec/jesd625-a and jedec/j-std-033.
spec no: dsac7646 rev no: v.6 date: jun/03/2016 page: 3 of 4 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1202001801
spec no: dsac7646 rev no: v.6 date: jun/03/2016 page: 4 of 4 approved: wynec checked: allen liu drawn: l.t.zhang erp: 1202001801 packing & label specifications AM4457P3C terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. if customer usage exceeds the spec ified limits, kingbright will not be respon sible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
